Refinishing Kitchen Cabinet

June 27, 2011 at 3:30 pm | Category: Cabinet Refinishing

Before you begin your Burlington cabinet refinishing task, there are few vital steps you should carry out in order to have a well-planned refinishing procedure. First of all, you will need to decide on how you wish to refinish your kitchen cabinets. There are plenty of routes you may take; they include varnishing your cabinets, painting or staining them. Basically the choice depends solely on what look you wish your kitchen to display. But you should choose wisely as not all stains work perfectly fine for your wood. For instance, a light fine finish can never blend well with dark mahogany wood.

Next, you should gather all the materials required for your kitchen cabinet refurbishment. When you have determined the type of refinishing to be done then you can start collecting the appropriate materials such as the paint and finishing agent. Besides, be aware that you will also need sandpaper, primer, degreaser, tack cloth, and some good quality paintbrushes. This is not the time for sponges or rollers. Then you can unfix the cabinets. If you are only refinishing the fronts then bring them down by easily unscrewing the screws and removing the hinges.

Then bring the cabinet fronts to your garage for your Burlington kitchen cabinet refinishing task. Take note that the area should not be too dusty to avoid dust sticking on the surfaces when drying. Then clean the cabinets as normally they would be covered with grime and grease. All these should be removed before you begin finishing them. A good degreaser should be very helpful. Also, scrub hard to clean any previous layers of varnish or paint. Oil paint is alright to be used over latex but vice versa could cause peeling. Therefore, if you wish to use latex you will need to completely remove the original oil paint. You can seek advice from the paint dealer regarding the suitable chemical product to remove the old finish.

Another aspect to take note for your kitchen cabinet refurbishment is the sanding. Sanding is important to smooth the cabinets. Always remember to use medium grade sandpaper and sand the cabinets evenly. Ensure that your cabinets have a clean and smooth surface before proceeding to the painting step. The key of sanding is to sand before painting and sand again after you are done with the finishing.

Dennis enjoys writing on wide range of topics such as kitchen cabinet refinishing and kitchen remodeling contractors. You may visit for more details.

Article Source: